Inhouse Capability List of Engine CFM56-3 GMF AeroAsia

NO	CAPABILITY LIST NO.	PART NAME	PART NUMBER	ATA REFERENCE	REPAIR SCHEME	DESCRIPTION	TAT	PRICE
1	TRP/72-09/001	LPT COOLING AIR TUBE	1466M14G01, 9335M34G07, 1466M14G02, 9386M83G01, 1466M14G03, 9386M83G02, 1466M73G01, 9386M83G03, 1466M74G01, 9386M85G01, 1466M77G01, 9386M85G02, 1466M88G01, 2046M50G01, 2046M51G01, 2046M52G01	72-09-03	INSP 001	CLEAN & INSPECT ONLY
				70-61-16	-	Repair of spherical misalignment (female) fittings for damaged silver plate
				72-09-04	002	Replace worn check valves in the flange assembly
				72-09-03	003	Patch doubler repair of the external tubing	see comment
				72-09-03	003	Sleeve doubler repair of the external tubing
				72-09-03	003	Section replacement repair of the external tubing
				72-09-04	007	Replacement of Worn Flappers in Check Valve Flange Assembly
				72-09-04	008	Inner wall weld repair of check valve flange assembly
2	TRP/72-21/002	FAN BLADE	N/A	N/A	N/A	N/A
3	TRP/72-21/003	BOOSTER BLADE, STAGE 2	1285M39P01, 9527M99P08, 1590M21P01, 9527M99P09, 1663M24P01, 9527M99P10, 1663M24P02, 9527M99P11, 1663M24P03, 1663M24P04, 1663M24P05	72-21-02	INSP 001	CLEAN & INSPECT ONLY
				72-21-02	001	Blend the blade tip and the leading and trailing edges
				72-21-02	002	Replacement of Lubricant Coating
4	TRP/72-21/004	BOOSTER BLADE, STAGE 3	335-002-405-0, 335-002-407-0	72-21-02	INSP 001	CLEAN & INSPECT ONLY
				72-21-02	001	Blend the blade tip and the leading and trailing edges
				72-21-02	002	Replacement of Lubricant Coating
5	TRP/72-21/005	BOOSTER BLADE, STAGE 4	335-002-505-0	72-21-02	INSP 001	CLEAN & INSPECT ONLY
				72-21-02	001	Blend the blade tip and the leading and trailing edges
				72-21-02	002	Replacement of Lubricant Coating
6	TRP/72-21/006	FAN DISK	N/A	N/A	N/A	N/A
6B	TRP/72-21/ 006B	SPOOL BOOSTER	335-009-306-0	72-21-04	INSP 001	CLEAN & INSPECT ONLY
				72-21-04	001	Replacement of the Hi-Lock fasteners and/or the sealing flange
				72-21-04	002	Spot touch-up sulfuric anodizing
				72-21-04	002	Full repair of sulfuric anodizing
7	TRP/72-21/007	SPINNER FRONT CONE	335-106-402-0, 335-106-405-0, 335-106-403-0, 335-106-404-0	72-21-05	INSP 001	CLEAN & INSPECT ONLY	see comment
				72-21-05	014	Defect less than 10% of surface. Removal Local Surface Defect and Reconditioning of the Anti erosion Paint on the Elliptical Spinner Front Cone
				72-21-05	014	Defect more than 10% of surface. Repair the Aerodynamic Contour and Reconditioning of the Sulfuric Anodizing on the Elliptical Spinner Front Cone
				72-21-05	014	If any amount sulfuric anodizing is missing only. Replace anti-erosion paint
				72-21-05	015	Reconditioning of the White Spiral-Shaped Mark on the Elliptical Spinner Front Cone
				72-21-05	016	Repair the locating diameter or to replace existing nickel-aluminum with plasma spray
				72-21-05	024	Repair the jack-screw holes
				72-21-05	028	Repair of Spinner Front Cone Flange Bolt Holes by installed bushing
8	TRP/72-21/008	SPINNER REAR CONE	335-011-205-0, 335-011-207-0, 335-011-208-0	72-21-05	INSP 001	CLEAN & INSPECT ONLY
				72-21-05	001	Condition Two: Removal of Surface Defects from Area A and area B, Spot Touch-up of the Oxide Film Coating
				72-21-05	002	Replacement of the crimped self-locking nuts on spinner rear cone
				72-21-05	019	Replacement of the bonded seal on spinner rear cone
9	TRP/72-21/009	BOOSTER BLADE INTERSTAGE SPACER	335-010-002-0	72-21-07	INSP 001	CLEAN & INSPECT ONLY
				72-21-07	-	Blending repair of all light defects
				70-41-11	-	Blending repair of all light defects
				72-21-07	001	Spot touchup of sulfuric acid anodizing
				72-21-07	001	Complete reconditioning of sulfuric anodizing
				72-21-07	002	Application of molybdenum disulfide coating on root pressure faces of spacer
10	TRP/72-21/010	FORWARD ROTATING AIRSEAL	335-009-804-0, 335-009-805-0, 335-009-806-0, 335-009-903-0	72-21-08	INSP 001	CLEAN & INSPECT ONLY
				70-42-51	-	Re-crimp the loose crimped self-locking nuts
				72-21-08	001	Replacement of crimped self-locking nuts
11	TRP/72-21/011	AFT BLADE RETAINER	335-009-903-0	72-21-08	INSP 001	CLEAN & INSPECT ONLY
				72-21-08	001	Replacement of crimped self-locking nuts
12	TRP/72-21/012	BOOSTER VANE STAGE 1	335-009-107-0, 335-009-108-0, 335-009-109-0, 335-009-110-0, 335-009-112-0, 335-009-113-0, 335-009-117-0, 335-009-118-0, 335-009-122-0, 335-009-123-0, 335-009-124-0, 335-009-125-0, 335-009-126-0, 335-009-127-0, 335-009-129-0, 335-009-130-0, 335-009-131-0, 335-009-132-0, 335-009-133-0, 335-009-134-0, 335-009-135-0, 335-009-136-0, 335-009-137-0, 335-009-145-0, 335-009-146-0, 335-009-147-0, 335-009-148-0, 335-009-149-0, 335-009-150-0, 335-009-151-0, 335-009-152-0, 335-009-153-0, 335-009-154-0, 335-009-155-0, 335-009-156-0, 335-009-157-0, 335-009-158-0, 335-009-159-0, 335-009-160-0, 335-009-161-0	72-21-09	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Hand blend/polish to remove erosion on L/E & T/E
				70-41-11	-	Hand blend/polish to remove corrosion from airfoil concave/convex surface
				72-21-09	001	Blending of Airfoils
				72-21-09	003	Replacement of the Al-Si-Poly Abradable Coating on the Outer Shrouds of Stages 1
13	TRP/72-21/013	BOOSTER VANE STAGE 2	335-006-509-0, 335-006-511-0, 335-006-512-0, 335-006-513-0, 335-006-514-0, 335-006-515-0, 335-006-516-0, 335-006-517-0, 335-006-518-0, 335-006-519-0	72-21-09	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Hand blend/polish to remove erosion on L/E & T/E
				70-41-11	-	Hand blend/polish to remove corrosion from airfoil concave/convex surface
				72-21-09	001	Blending of Airfoils
14	TRP/72-21/014	BOOSTER VANE STAGE 3	335-006-607-0, 335-006-609-0, 335-006-610-0, 335-006-611-0, 335-006-612-0, 335-006-613-0, 335-006-614-0, 335-006-615-0, 335-006-616-0, 335-006-617-0, 335-006-619-0, 335-006-620-0, 335-006-621-0, 335-006-622-0, 335-006-623-0, 335-006-624-0, 335-006-625-0, 335-006-626-0, 335-006-627-0, 335-006-628-0, 335-006-629-0, 335-006-630-0, 335-006-631-0, 335-006-632-0, 335-006-633-0, 335-006-634-0	72-21-09	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Hand blend/polish to remove erosion on L/E & T/E
				70-41-11	-	Hand blend/polish to remove corrosion from airfoil concave/convex surface
				72-21-09	001	Blending of Airfoils
				72-21-09	003	Replacement of the Al-Si-Poly Abradable Coating on the Outer Shrouds of Stages 3
				72-21-09	004	Replacement Of The Self-Locking Crimped Nuts And/Or The Riveted Self-Locking Nuts
15	TRP/72-21/015	BOOSTER VANE STAGE 4	335-006-708-0, 335-006-709-0, 335-006-710-0, 335-006-711-0, 335-006-714-0, 335-006-716-0, 335-006-717-0, 335-006-718-0, 335-006-719-0, 335-006-720-0, 335-006-721-0, 335-006-722-0, 335-006-723-0, 335-006-724-0, 335-006-725-0, 335-006-726-0, 335-006-727-0, 335-006-728-0, 335-006-729-0, 335-006-730-0, 335-006-731-0, 335-006-732-0, 335-006-733-0, 335-006-734-0,	72-21-09	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Hand blend/polish to remove erosion on L/E & T/E
				70-41-11	-	Hand blend/polish to remove corrosion from airfoil concave/convex surface
				72-21-09	001	Blending of Airfoils
				72-21-09	003	Replacement of the Al-Si-Poly Abradable Coating on the Outer Shrouds of Stages 3
				72-21-09	004	Replacement Of The Self-Locking Crimped Nuts And/Or The Riveted Self-Locking Nuts
16	TRP/72-21/016	DAMPER ASSEMBLY	335-105-305-0	72-21-16	INSP 001	CLEAN & INSPECT ONLY
				70-66-12	-	Re-install the loose/existing Front Upper and Lower Shield
				70-66-12	-	Re-install the loose/existing Rear Upper Shield
				72-21-16	INSP 001	Replace Front Upper and Lower Shield.
				72-21-16	INSP 001	Replace Rear Upper Shield
17	TRP/72-22/017	FAN SHAFT	335-006-405-0, 335-006-407-0, 335-006-414-0	72-22-01	INSP 001	CLEAN & INSPECT ONLY
				70-42-51	-	Crimp the nuts
				72-22-01	001	Replacement of the Aluminum Paint
				72-22-01	002	Replace the crimped nuts
				72-22-01	013	Repair of illegible part markings
18	TRP/72-22/018	NO.1 BRG SUPPORT	335-003-304-0, 335-003-305-0, 335-003-308-0	72-22-02	INSP 001	CLEAN & INSPECT ONLY
				72-22-02	001	Replace the defective crimped self-locking nuts
				72-22-02	003	Repair diameter C that locates the No. 2 bearing support
				72-22-02	004	Repair diameter A that locates the fan frame
19	TRP/72-22/019	NO.2 BRG SUPPORT	335-010-102-0, 335-010-104-0	72-22-03	INSP 001	CLEAN & INSPECT ONLY
				72-22-03	001	Replacement of swaged self-locking inserts
				72-22-03	002	Recondition diameter A which locates the No. 1 bearing support, by plasma metal spraying
20	TRP/72-22/020	OIL SEPARATOR RING	305-396-303-0, 305-396-306-0	72-22-05	INSP 001	CLEAN & INSPECT ONLY
				72-22-05	001	Reconditioning the rabbet diameters locating with the fan shaft (Dia A and/or Dia C) by thermal spraying with Ni-Al powder 5%
21	TRP/72-22/021	REAR ROTATING AIR OIL SEAL	301-298-208-1, 301-298-211-0	72-22-06	INSP 001	CLEAN & INSPECT ONLY
				72-22-06	001	Recondition the silver plating on the forward mating face and/or the threads
22	TRP/72-22/022	STATIONARY AIR OIL SEAL	301-287-119-0, 305-439-401-0, 305-439-402-0	72-22-11	INSP 001	CLEAN & INSPECT ONLY
				70-65-11	-	Locally repair delaminated skin on area C by bonding with epoxy adhesive
				72-22-11	INSP 001	Repair of Diameter I and Diameter Y
				72-22-11	001	Repair damage riveted nut by replacement)
				72-22-11	002	Locally repair the abradable lining
				72-22-11	002	Replace the abradable lining
				72-22-11	003	Repair of a loose drain tube by installation of a silicone bonded retaining ring
				72-22-11	004	Repair of Molybdenum Disulfide Dry Film Lubricant Coating
				72-22-11	005	Replacement of Swaged Self-Locking Inserts
				72-22-11	005	Replacement of Sleeve Assembly
23	TRP/72-22/023	NO.1 BRG RETAINING NUT	301-537-905-0, 301-298-006-0	72-22-11	INSP 001	CLEAN & INSPECT ONLY
				72-22-11	001	Replacement of silver plating
24	TRP/72-23/024	FAN OGV	335-034-501-0, 335-034-622-0, 335-034-502-0, 335-034-623-0, 335-034-503-0, 335-034-624-0, 335-034-604-0, 335-034-701-0, 335-034-605-0, 335-034-702-0, 335-034-606-0, 335-034-703-0, 335-034-621-0	72-23-03	INSP 001	CLEAN & INSPECT ONLY
				72-23-03	001	Blend Repair of the Airfoil and Platform of the Aluminum Fan Outlet Guide Vanes
				72-23-03	002	Reconditioning of Protective Coatings on the Aluminum Fan Outlet Guide Vanes
				72-23-03	002	Repair of leading edge erosion
				72-23-03	008	Removal of corrosion and repair of protective coating
				72-23-03	009	Repair of the vane root faces convex side by plasma
25	TRP/72-23/025	HOUSING INNER RADIAL DRIVE SHAFT	334-007-110-0, 335-030-602-0, 335-030-701-0	72-23-05	INSP 001	CLEAN & INSPECT ONLY
				72-23-05	004	Repair Of The Outer Locating Diameter Of The Inner Radial Drive Shaft Housing
26	TRP/72-23/026	FAN DUCT PANEL	301-473-720-0, 335-031-311-0, 335-034-101-0, 301-473-725-0, 335-031-501-0, 335-034-111-0, 305-082-809-0, 335-031-502-0, 335-034-201-0, 305-082-812-0, 335-031-601-0, 335-034-209-0, 335-031-201-0, 335-031-611-0, 335-085-003-0, 335-031-211-0, 335-084-803-0, 335-085-103-0, 335-031-301-0, 335-084-903-0	72-23-07	INSP 001	CLEAN & INSPECT ONLY
				72-23-07	001	Reconditioning of cracked fan duct panels by weld buildup
				72-23-07	002	Replacement of the blanking plate bonded on fan duct panels
27	TRP/72-23/027	FORWARD ACOUSTIC PANEL	335-011-303-0, 335-011-305-0, 335-011-307-0	72-23-08	INSP 001	CLEAN & INSPECT ONLY
				72-23-08	002	Partial Reconditioning of Anti-erosion Protection
				72-23-08	003	Replace Components at attachment points and hold them with a screw and nut system while you bond them
				72-23-08	006	Repair of through defects with a total surface area less than 1 sq. In. (6,5 sq. Cm) per panel
28	TRP/72-23/028	MID ACOUSTIC PANEL	335-011-903-0, 335-011-904-0	72-23-08	INSP 001	CLEAN & INSPECT ONLY
				72-23-08	002	Partial Reconditioning of Anti-erosion Protection
				72-23-08	004	Replacement of Components at attachment points of mid acoustical panels
				72-23-08	006	Repair of through defects with a total surface area less than 1 sq. In. (6,5 sq. Cm) per panel.
29	TRP/72-23/029	AFT ACOUSTIC PANEL	335-017-202-0, 335-017-207-0, 335-017-209-0, 335-017-212-0, 335-017-303-0, 335-017-310-0, 335-017-312-0, 335-017-315-0, 335-017-403-0, 335-017-409-0, 335-017-410-0, 335-017-413-0, 335-017-416-0, 335-022-802-0, 335-022-806-0, 335-022-808-0, 335-022-811-0, 335-022-903-0, 335-022-908-0, 335-022-909-0, 335-022-911-0, 335-022-914-0, 335-038-003-0, 335-038-009-0, 335-038-010-0, 335-038-012-0, 335-038-015-0, 335-038-103-0, 335-038-109-0, 335-038-110-0, 335-038-112-0, 335-038-115-0, 335-038-203-0, 335-038-210-0, 335-038-212-0, 335-038-215-0, 335-038-217-0, 335-038-303-0, 335-038-310-0, 335-038-311-0, 335-038-313-0, 335-038-316-0, 335-063-104-0, 335-063-109-0, 335-063-111-0, 335-063-113-0, 335-063-115-0, 335-063-606-0, 335-063-610-0, 335-063-611-0, 335-063-613-0, 335-063-616-0	72-23-08	INSP 001	CLEAN & INSPECT ONLY
				72-23-08	002	Partial Reconditioning of Anti-erosion Protection
				72-23-08	005	Replace the components at the attachment points and hold them tight with a screw and nut system while you bond them
				72-23-08	006	Repair of through defects with a total surface area less than 1 sq. In. (6,5 sq. Cm) per panel.
30	TRP/72-23/030	NO.3 BRG FWD STATIONARY OIL SEAL	9336M78G01, 9339M40G01, 9339M40G02, 9339M40G03, 9339M40G04, 9339M40G05	72-23-19	INSP 001	CLEAN & INSPECT ONLY
				72-23-19	001	Replacement of Abradable Seal
				72-23-19	002	Repair of Abradable Seal
				72-23-19	004	Repair of the Loose or Missing Bushings
				72-23-19	005	Repair of the Loose or Missing Bushings
				72-23-19	007	Repair for of the oil drain cavity bonded joint leaks
31	TRP/72-23/031	NO.3 BRG AFT STATIONARY SEAL	1278M61G02, 1663M19G05, 1663M90G08, 1663M90G19, 1960M96G03, 1960M96G10, 1960M96G20, 1960M96G30, 1960M96G40, 1960M96G49, 1279M52G03, 1663M19G07, 1663M90G09, 1663M90G20, 1960M96G04, 1960M96G12, 1960M96G22, 1960M96G31, 1960M96G41, 1960M96G51, 1279M52G05, 1663M19G08, 1663M90G10, 1663M91G01, 1960M96G05, 1960M96G14, 1960M96G23, 1960M96G32, 1960M96G42, 1960M96G53, 1279M52G06, 1663M19G10, 1663M90G11, 1663M91G03, 1960M96G06, 1960M96G15, 1960M96G24, 1960M96G34, 1960M96G44, 1960M96G54, 1279M53G02, 1663M19G11, 1663M90G15, 1663M91G04, 1960M96G07, 1960M96G16, 1960M96G25, 1960M96G36, 1960M96G46, 9339M50G03, 1279M53G03, 1663M90G01, 1663M90G17, 1960M96G01, 1960M96G08, 1960M96G17, 1960M96G26, 1960M96G38, 1960M96G47, 9339M50G04, 1663M19G01, 1663M90G05, 1663M90G18, 1960M96G02, 1960M96G09, 1960M96G18, 1960M96G28, 1960M96G39, 1960M96G48	72-23-20	INSP 001	CLEAN & INSPECT ONLY
				72-23-20	001	Replacement of Abradable Seal
				72-23-20	006	Repair of Bonded Joint Leaks
				72-23-20	008	Repair of resin loss on the outer cone area using Araldite AW106
32	TRP/72-31-032	COMPRESSOR ROTOR BLADES, STAGE 1	N/A	N/A	N/A	N/A
33	TRP/72-31-033	COMPRESSOR ROTOR BLADES, STAGE 2	N/A	N/A	N/A	N/A
34	TRP/72-31-034	COMPRESSOR ROTOR BLADES, STAGE 3	N/A	N/A	N/A	N/A
35	TRP/72-31-035	COMPRESSOR ROTOR BLADES, STAGE 4	N/A	N/A	N/A	N/A
36	TRP/72-31-036	COMPRESSOR ROTOR BLADES, STAGE 5	N/A	N/A	N/A	N/A
37	TRP/72-31-037	COMPRESSOR ROTOR BLADES, STAGE 6	N/A	N/A	N/A	N/A
38	TRP/72-31-038	COMPRESSOR ROTOR BLADES, STAGE 7	N/A	N/A	N/A	N/A
39	TRP/72-31-039	COMPRESSOR ROTOR BLADES, STAGE 8	N/A	N/A	N/A	N/A
40	TRP/72-31-040	COMPRESSOR ROTOR BLADES, STAGE 9	N/A	N/A	N/A	N/A
41	TRP/72-31/041	HPC SPOOL, STG1-2	1589M66G01, 1589M66G02, 1589M66G03, 9992M60G05, 9992M60G06, 9992M60G07	72-31-04	INSP 001	CLEAN & INSPECT ONLY
				72-31-04	006	Apply the Molydag 254 coating on the stages 1 and 2 dovetail pressure faces
42	TRP/72-31/042	COMPRESSOR ROTOR SPOOL, STAGES 4 – 9	1277M89G03, 1277M97G02, 1358M94G01, 1588M89G03, 1590M29G01, 9513M93G05	72-31-06	INSP 001	CLEAN & INSPECT ONLY
				72-31-06	002	Repair of illegible part markings
				72-31-06	004	Blend repair of blade platform rails
43	TRP/72-31/043	COMP ROTOR SHAFT	1275M37P01, 1590M32G02, 1275M37P02, 1590M32G03, 1590M30G01, 1590M32G04 1590M30G02, 9511M57P01, 1590M30G03, 1590M30G04, 1590M32G01	72-31-07	INSP 001	CLEAN & INSPECT ONLY
				70-63-11	-	Apply dry film lubricant (CP2229) to the shaft threads
				72-31-07	004	Blend repair of light wear on locking lug slots
				72-31-07	004	Repair of worn/damaged locking lug slots more than 0.440 in. (11,18 mm) width by machining
				72-31-07	005	Repair of rabbet diameters (Dia B and/or Dia C) of the aft flange
				72-31-07	008	Repair damage on the area P of the compressor rotor shaft, by blending procedure
44	TRP/72-31/044	COMP ROTOR REAR ROTATING AIR SEAL	1319M25P01, 1319M25P02, 1359M32P01, 9514M68P01	72-31-08	INSP 001	CLEAN & INSPECT ONLY
				72-31-08	002	Repair of Illegible Part Markings
45	TRP/72-31/045	COMPRESSOR ROTOR AIRDUCT	9514M54G02	72-31-11	INSP 001	CLEAN & INSPECT ONLY
				72-31-11	001	Repair of Forward Mating Surface dia J (area P)
				72-31-11	002	Repair of Illegible Part Markings
				72-31-11	004	Repair of the Aft Support Lugs Area Q (dim M and/or dia B)
				72-31-11	005	Repair of dia BB without removal of the present coating
				72-31-11	005	Replace coating if the wear is through the coating and in the parent metal, or apply new coating if there is no coating on dia BB
46	TRP/72-32/046	HPC FRONT CASE	1276M13G04, 9992M69G40, 1676M88G01, 1276M13G05, 9937M86P01, 1276M13G07, 9794M50P01, 1276M13G08, 9794M50P02, 1276M13G11, 1449M30G03, 1282M90G02, 1499M30G01, 9513M64G02 1499M30G02	72-32-01	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Removal of any nicks, dents, and scratches on the flow path surface by blending
				70-44-60	-	Repair damaged thread by re-tapping
				72-32-01	001	Replacement of key locked inserts
47	TRP/72-32/047	INLET GUIDE VANE	P210P01, P210P02, P210P04, P250P01	72-32-02	INSP 001	CLEAN & INSPECT ONLY
				72-32-02	001	Blend damaged or eroded airfoils
48	TRP/72-32/048	VARIABLE GUIDE VANE, STG.1	P201P01, P201P08, P251P07, P201P02, P201P15, P251P08, P201P03, P201P16, P241P01, P201P04, P251P03, P241P02, P201P05, P251P04, P201P06, P251P05, P201P07, P251P06	72-32-02	INSP 001	CLEAN & INSPECT ONLY
				72-32-02	001	Blend damaged or eroded airfoils
49	TRP/72-32/049	VARIABLE GUIDE VANE, STG.2	P202P01, P252P04, P202P02, P242P01, P202P03, P242P02, P202P04, P202P09, P202P10 P252P03	72-32-02	INSP 001	CLEAN & INSPECT ONLY
					001	Blend damaged or eroded airfoils
50	TRP/72-32/050	VARIABLE GUIDE VANE, STG.3	P213P01, P223P08, P213P02, P253P07, P223P01, P253P08, P223P02, P253P09, P223P03, P253P10, P223P04, P243P01, P223P07, P243P02	72-32-02	INSP 001	CLEAN & INSPECT ONLY
				72-32-02	001	Blend damaged or eroded airfoils
51	TRP/72-32/051	COMPRESSOR STATOR VANE SECTOR STAGE 4	9526M64G07, 9526M64G08, 9526M64G09, 9526M64G10, 9526M64G11, 9526M64G12	70-41-11	-	Blend repair of erosion leading and trailing edges of the airfoil
			9526M64G15, 9526M64G16, 9526M64G17, 9526M65G09, 9526M65G10, 9526M65G11,
			9526M65G12 ,9526M65G16, 9526M65G17 ,,9526M65G19, 9526M65G20, 9528M65G18,	72-32-03	001	Replacement of worn coating and parent metal on the inner support of the vane sector outer platform
			9978M92G05, 9978M92G06, 9978M92G13, 9978M92G14, 9978M92G17, 9978M92G18	72-32-03	002	Blend leading and trailing edges
			P254G01, P254G02, P254G03, P254G04	72-32-03	005	Repair the tears or wear at the vane sector seal slot crimps
52	TRP/72-32/052	COMPRESSOR STATOR VANE SECTOR STAGE 5	1282M25G02, 1282M25G03, 1282M25G04, 1282M25G05, 1282M25G06 ,1282M64G07	70-41-11	-	Blend repair of erosion leading and trailing edges of the airfoil
			1282M64G08, 1282M64G09, 1282M64G11, 1282M64G12, 1282M64G15, 1282M64G16	72-32-03	001	Replacement of worn coating and parent metal on the inner support of the vane sector outer platform
			1282M64G17, 1282M65G09, 1282M65G10, 1282M65G10, 1282M65G11, 1282M65G12,	72-32-03	002	Blend repair of leading and trailing edges
			1282M65G16, 1282M65G17, 1282M65G18, 1282M65G19, 1282M65G20, P255G01, P255G02, P255G03, P255G04	72-32-03	005	Repair the tears or wear at the vane sector seal slot crimps
53	TRP/72-32/053	COMP STATOR SHROUD,IGV	1276M66P02, 1285M34P01	72-32-06	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Remove nicks, pits, scores, scratches, and wear by blending
54	TRP/72-32/054	COMPRESSOR STATOR SHROUD, STAGE 1	1358M63G01, 1358M63G02, 9992M65G06, 9992M65G07, 9992M65G08, 9992M65G09, 9992M65G10, 9992M65G11	72-32-07	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Repair of local wear on flow path surface.
				72-32-07	001	Bore Repair
				72-32-07	002 (partial)	Anti rotation pin replacement using old P/N pin
				72-32-07	002 (partial)	Anti rotation pin replacement using new P/N pin (Repair 002 and RD 070-739-S1) and SB 72-1091
				72-32-07	003	Repair of wear on the end bore hole diameter A
55	TRP/72-32/055	COMPRESSOR STATOR SHROUD, STAGE 2	1358M63G03, 1358M63G04, 9994M18G03, 9994M18G04, 9994M18G05, 9994M18G06, 9994M18G07, 9994M18G08	72-32-07	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Repair of local wear on flow path surface.
				72-32-07	001	Bore Repair
				72-32-07	002 (partial)	Anti rotation pin replacement using old P/N pin
				72-32-07	002 (partial)	Anti rotation pin replacement using new P/N pin (Repair 002 and RD 070-739-S1) and SB 72-1091
				72-32-07	003	Repair of wear on the end bore hole diameter A
56	TRP/72-32/056	COMPRESSOR STATOR SHROUD, STAGE 3	1277M91G01, 1277M91G02, 1277M91G03, 1277M91G04, 1277M91G05, 1277M91G06, 1358M63G07, 9994M19G03, 9994M19G04	72-32-07	INSP 001	CLEAN & INSPECT ONLY
				70-41-11	-	Repair of local wear on flow path surface.
				72-32-07	001	Bore Repair
				72-32-07	002 (partial)	Anti rotation pin replacement using old P/N pin
				72-32-07	002 (partial)	Anti rotation pin replacement using new P/N pin (Repair 002 and RD 070-739-S1) and SB 72-1091
				72-32-07	003	Repair of wear on the end bore hole diameter A
57	TRP/72-32/057	COMPRESSOR STATOR ACTUATION RING, IGV	9279M20P01, 1318M20P01	72-32-11	INSP 001	CLEAN & INSPECT ONLY
				72-32-11	-	Replacement of flanged bushings
58	TRP/72-32/058	COMPRESSOR STATOR ACTUATION RING, STAGE 1	9279M21P01, 1318M21P01	72-32-11	INSP 001	CLEAN & INSPECT ONLY
				72-32-11	-	Replacement of flanged bushings
59	TRP/72-32/059	COMPRESSOR STATOR ACTUATION RING, STAGE 2	9279M22P01, 1318M22P01	72-32-11	INSP 001	CLEAN & INSPECT ONLY
				72-32-11	-	Replacement of flanged bushings
59B	TRP/72-32/059B	COMPRESSOR STATOR ACTUATION RING, STAGE 3	9279M23P01, 1318M23P01	72-32-11	INSP 001	CLEAN & INSPECT ONLY
				72-32-11	-	Replacement of flanged bushings
60	TRP/72-33/060	COMPRESSOR REAR STATOR VANE SECTORS STAGE 6	1476M26G01, 1476M26G02, 1476M26G03, 1476M26G04, 9512M26G05, 9512M26G07,	72-33-02	001	Replacement of worn wear coating and parent metal on the inner support of the vane sector outer platform
			9512M26G08, 9512M26G09, 9512M26G10, 9512M26G11, 9512M26G14, 9512M26G15,
			9993M86G13, 9993M86G14, 9993M86G17, 9993M86G18, 9993M86G19, 9993M86G20,	72-33-02	002	Blend leading and trailing edges
			9993M86G21, 9993M86G22	72-33-02	005	Repair the tears or wear at the vane sector seal slot crimps
61	TRP/72-33/061	COMPRESSOR REAR STATOR VANE SECTORS STAGE 7	1476M27G01, 1476M27G02, 1476M27G03, 1476M27G04, 9512M27G05, 9512M27G07,	72-33-02	001	Replacement of worn wear coating and parent metal on the inner support of the vane sector outer platform
			9512M27G08, 9512M27G09, 9512M27G10, 9512M27G11, 9512M27G14, 9512M27G15,
			9993M87G13, 9993M87G14, 9993M87G17, 9993M87G18, 9993M87G19, 9993M87G20,	72-33-02	002	Blend leading and trailing edges
			9993M87G21, 9993M87G22	72-33-02	005	Repair the tears or wear at the vane sector seal slot crimps
62	TRP/72-33/062	COMPRESSOR REAR STATOR VANE SECTORS STAGE 8	1476M28G01, 1476M28G02, 1476M28G03, 1476M28G04, 9512M28G05, 9512M28G09,	72-33-02	001	Replacement of worn wear coating and parent metal on the inner support of the vane sector outer platform
			9512M28G10, 9512M28G11, 9512M28G12, 9512M28G13, 9512M28G17, 9512M28G18,	72-33-02	002	Blend leading and trailing edges
			9993M88G15, 9993M88G17, 9993M88G19, 9993M88G20, 9993M88G21, 9993M88G22	72-33-02	005	Repair the tears or wear at the vane sector seal slot crimps
63	TRP/72-41/063	COMBUSTION CASE	1285M90G01, 1359M77G03, 1808M78G11, 9523M17G15, 9529M99G07, 1285M90G02, 1359M77G05, 1808M78G12, 9529M99G01, 9529M99G08, 1285M90G08, 1359M77G06, 9523M17G10, 9529M99G02, 9529M99G09, 1285M90G09, 1808M78G03, 9523M17G11, 9529M99G03, 1285M90G11, 1808M78G05, 9523M17G12, 9529M99G04, 1285M90G12, 1808M78G06, 9523M17G13, 9529M99G05, 1285M90G13, 1808M78G09, 9523M17G14, 9529M99G06	72-41-01	INSP 001	CLEAN & INSPECT ONLY
				70-41-14	-	Remove the broken bolt
				70-41-11 & 70-41-12	-	Blend light defects (wear n fretted)
				70-44-60	-	Repair damaged inner thread
				72-41-01	006	Repair combustion case flange diameter K and surface V by thermal spray and machining
				72-41-01	006	Weld repair of Diameter D
				72-41-01	009	Weld repair of wear/groove up to 0.18 inch maximum deep on the LPT cooling air pad
64	TRP/72-41/064	FUEL MANIFOLD	9375M90G03, 9375M90G12, 9375M90G04, 9375M90G13, 9375M90G05, 9375M90G14, 9375M90G06, 9375M90G09, 9375M90G10, 9375M90G11	72-41-04	INSP 001	CLEAN & INSPECT ONLY
				72-41-04	002	Repair of Silver Plate or Dry Film Lubricant on Tube Fitting Nuts
65	TRP/72-41/065	HPT NOZZLE SUPPORT NUT SHIELD	9991M39G03, 9991M40G03, 9528M56G01, 9528M57G01	72-41-06	INSP 001	CLEAN & INSPECT ONLY
				72-41-06	001	Replacement of Damaged Welded Nuts with Swaged Nuts
				72-41-06	002	Replacement of damaged swaged nuts in the HPT nozzle support nut shields
66	TRP/72-41/066	HPT SUPPORT BOLT EROSION SHIELD	1275M68G01	72-41-09	INSP 001	CLEAN & INSPECT ONLY
				72-41-09	001	Re- forming of bent or distorted bolt erosion shields
67	TRP/72-41/067	HPT GANG CHANNEL NUT	9232M90P06, 9232M90P07, 9232M90P08, 9232M90P09	72-41-10	INSP 001	CLEAN & INSPECT ONLY
				72-41-10	001	Replace damaged self- locking nuts
				72-41-10	001	Weld repair of cracks
68	TRP/72-51/068	HIGH PRESSURE TURBINE NOZZLE SEGMENTS	N/A	N/A	N/A	N/A
69	TRP/72-51/069	HPT NOZZLE OUTER SUPPORT	1283M11G01, 1441M32P07, 9523M63G01, 9999M78P09, 1441M32P01, 1523M82P01, 9523M63G02, 9999M78P10, 1441M32P02, 1523M82P02, 9523M63G03, 1441M32P03, 1523M82P03, 9523M63G04, 1441M32P04, 1523M82P04, 9523M63G05, 1441M32P05 1523M88G01, 9999M78P06, 1441M32P06, 1523M88G02, 9999M78P07	72-51-02	INSP 001	CLEAN & INSPECT ONLY
				72-51-02	001	Repair the HPT nozzle outer support aft flange hard coat
				72-51-02	008 / 009 / 010	Repair the face near the inside diameter of nozzle support forward flange (config. 3 & 4, coated) for wear less than 0.030 inch (0,76 mm) depth
70	TRP/72-51/070	HPT NOZZLE AFT INNER SUPPORT	1283M89G02, 1316M38G01, 1316M38G02, 9212M36G03, 9212M36G04, 9523M22G01, 9523M22G02	72-51-03	INSP 001	CLEAN & INSPECT ONLY
				70-45-11	-	Weld repair of crack that originating from aft flange edge to the hole
				72-51-03	001	Replacement of Shank Nuts on the Aft Inner Support (Support) for the HPT
				72-51-03	002	Replacement of Shouldered Pins
				72-51-03	002	Replacement of Straight Pins
71	TRP/72-51/071	HPT AFT OUTER SEAL SUPPORT	1283M87G01, 1498M95G02, 9993M67G02, 1283M87G02, 1498M95G03, 9993M67G04 1285M66G01, 1498M95G04, 1285M66G02, 1808M66G01, 1285M66G03, 1808M66G02 1285M66G04, 1808M66G03, 1285M66G05, 1808M66G04	72-51-04	INSP 001	CLEAN & INSPECT ONLY
				72-51-04	001	Repair the aft outer seal support hard coat
				72-51-04	005	Crack repair
72	TRP/72-52/072	HPT ROTOR DISK	1475M29P01, 9514M69P09, 1475M29P02, 1475M29P03, 9514M69P01, 9514M69P04, 9514M69P05, 9514M69P06	72-52-02	INSP 001	CLEAN & INSPECT ONLY
				72-52-02	001	Removal and installation of disk shank nuts
				72-52-02	003	Blend repair of disk dovetail slot (aft side) corner
73	TRP/72-52/073	HIGH PRESSURE TURBINE ROTOR FRONT ROTATING AIR SEAL	1275M32P01, 1282M72P02, 1282M72P03, 1282M72P04, 1282M72P05	72-52-03	INSP 001	CLEAN & INSPECT ONLY
				72-52-03	002	Repair of illegible part markings
74	TRP/72-52/074	HPT ROTOR FRONT SHAFT	1282M34P02, 1282M71P01, 1441M26P02, 1441M26P03, 1385M90P01, 1385M90P04, 9514M72P03	72-52-04	INSP 001	CLEAN & INSPECT ONLY
				72-52-04	002	Repair the forward rabbet dimension (Dia C) on the HPT front shaft using Inconel 718 thermal spray
75	TRP/72-52/075	HIGH PRESSURE TURBINE ROTOR REAR SHAFT	1864M91P02, 9514M71P04, 9514M71P05, 9514M71P06, 9514M71P07	72-52-05	INSP 001	CLEAN & INSPECT ONLY
76	TRP/72-52/076	NO.4 BEARING RETAINER	9339M45P01, 9339M45P02 9339M45P03	72-52-08	INSP 001	CLEAN & INSPECT ONLY
				70-61-16	-	Apply the silver plate to surface A and the threads
77	TRP/72-53/077	HIGH PRESSURE TURBINE SHROUD SUPPORT ASSEMBLY	1318M95G01, 1498M29G02, 1498M29G03, 1499M74G03, 1499M74G04, 1499M74G05, 1499M74G06, 1499M74G07, 1499M74G08, 1667M55G01, 1667M55G02, 1667M55G03, 9512M44G04, 9528M88G06, 9528M88G07, 9528M88G08, 9528M88G09, 9528M88G14, 9528M88G15, 9528M88G17, 9528M88G19, 9528M88G20, 9528M88G21, 9528M88G23, 9528M88G24, 9528M88G25	72-53-02	INSP 001	CLEAN & INSPECT ONLY
				72-53-02	002	Tack weld the bushing
				72-53-02	003	Replace the slabbed head bolts (SB 72-0414, pre SB 72-0480) ( 10-20 , 21 , 22, 72-00-02 ) in the HPT shroud / LPT nozzle support
				72-53-02	003	Replace the slabbed head bolts (SB 72-0480) ( 10-20 , 21, 22 , 23, 25, 72-00-02 ) in the HPT shroud / LPT nozzle support
				72-53-02	004	Replace Forward Shroud Support Hangers (Config 1), and Cooling Air Distributor (Solid Shroud Config 1)
				72-53-02	006	Stop-drill of cracks in the area of the borescope and bushing holes
				72-53-02	011	Weld repair of the aft rail
				72-53-02	012	high pressure turbine stator air shield repair
78	TRP/72-53/078	HIGH PRESSURE TURBINE SHROUD AIR IMPINGEMENT MANIFOLD	1277M55G01, 9513M16G04	72-53-05	INSP 001	CLEAN & INSPECT ONLY
				72-53-05	001	Tack weld and/or spot weld repair of HPT shroud air impingement manifold
				72-53-05	002	Weld repair non-serviceable nicks, linear indications, and lack of material
				72-53-05	003	Replace missing or defective rivets
				72-53-05	004	Air impingement manifold cold work repair
79	TRP/72-53/079	LPT NOZZLE SEGMENT STG 1	305-350-045-0, 305-350-151-0, 305-350-157-0, 305-350-049-0, 305-350-048-0, 305-350-158-0 305-350-050-0, 305-350-057-0, 305-350-159-0, 305-350-051-0, 305-350-058-0, 305-350-160-0 305-350-145-0, 305-350-059-0, 305-350-149-0, 305-350-060-0, 305-350-150-0, 305-350-148-0	72-53-06	INSP 001	CLEAN & INSPECT ONLY
				72-53-06	001	Blend repair of vane airfoils
				72-53-06	006	Touchup of Protective Coating on Stage 1 Nozzle Segments
80	TRP/72-53/080	LPT NOZZLE STATIONARY AIR SEAL, STG.1	305-380-107-0	72-53-08	INSP 001	CLEAN & INSPECT ONLY
				70-41-11& 70-41-12	-	Blend imprint of air ducts
				72-53-08	002	Reconditioning of thermal coating on mating face (Surface B)
				72-53-08	003	Reconditioning of Ni, Al 5 percent Al Thermal Coating of Locating Diameter
81	TRP/72-54/081	LOW PRESSURE TURBINE ROTOR BLADES, STAGE 1	N/A	N/A	N/A	N/A
82	TRP/72-54/082	LOW PRESSURE TURBINE ROTOR BLADES, STAGE 2	N/A	N/A	N/A	N/A
83	TRP/72-54/083	LOW PRESSURE TURBINE ROTOR BLADES, STAGE 3	N/A	N/A	N/A	N/A
84	TRP/72-54/084	LOW PRESSURE TURBINE ROTOR BLADES, STAGE 4	N/A	N/A	N/A	N/A
85	TRP/72-54/085	LPT SHROUD SUPPORT	301-555-227-0, 301-555-228-0	72-54-04	002	Repair cracks originating from aft edge of LPT shroud support by gas-shielded tungsten arc welding
86	TRP/72-54/086	LOW PRESSURE TURBINE ROTOR (CONICAL) SUPPORT	305-056-106-0, 305-056-117-0, 305-056-124-0, 305-056-109-0, 305-056-118-0, 305-056-110-0	72-54-05	001	Repair the LPT stub shaft locating diameter (Dia B) by plasma spraying
			305-056-119-0, 305-056-111-0, 305-056-120-0, 305-056-112-0, 305-056-121-0, 305-056-115-0	72-54-05	002	Reconditioning the stage 3 rotating air seal locating diameter (Dia G) by plasma spraying
			305-056-122-0, 305-056-116-0, 305-056-123-0	72-54-05	004	Remarking the part
87	TRP/72-54/087	LOW PRESSURE TURBINE ROTATING AIR SEALS, STAGE 1	301-331-716-0, 301-331-718-0, 301-331-720-0, 301-331-721-0	72-54-06	003	Touch up of seal teeth by blending
88	TRP/72-54/088	LOW PRESSURE TURBINE ROTATING AIR SEALS, STAGE 2	301-331-816-0, 301-331-818-0, 301-331-819-0, 301-331-820-0	72-54-06	003 47M55G01;	Touch up of seal teeth by blending
89	TRP/72-54/089	LOW PRESSURE TURBINE ROTATING AIR SEALS, STAGE 3	301-331-919-0, 301-331-921-0, 301-331-922-0, 301-331-923-0	72-54-06	3	Touch up of seal teeth by blending
90	TRP/72-54/090	LOW PRESSURE TURBINE ROTATING AIR SEALS, STAGE 4	301-332-012-0, 301-332-014-0, 301-332-015-0, 301-332-016-0	72-54-06	3	Touch up of seal teeth by blending
91	TRP/72-54/091	LPT CASE	305-078-645-0, 305-078-643-0, 305-078-648-0, 305-078-642-0, 305-078-651-0, 305-078-652-0	70-41-12	-	Blend repair nick, fretted or scratch on LPT Casing skin
			305-078-653-0, 305-078-654-0, 305-078-639-0	70-41-12	-	Blend repair to nozzle & support ring
				72-54-07	001	Replacement of Riveted parts (ring sector support, bracket, & backing plate) & Rivets
				72-54-07-	002	Weld buildup of cracks in weld beads of bosses, for the cracked weld length is equal or less than 1.00 inch (25,4 mm)
				72-54-07	003	Weld Buildup of Cracks in Slots
				72-54-07	025	Repair of cracks on the shield shroud sectors of the LPT case by weld build up
92	TRP/72-54/092	LPT NOZZLE SEGMENT, STG.2	305-390-301-0, 305-390-603-0, 305-390-308-0, 305-390-507-0, 305-390-607-0, 305-390-303-0	70-41-11	-	Remove high metal and burrs on lateral faces by blending
			305-390-604-0, 305-390-311-0, 305-390-510-0, 305-390-304-0, 305-390-501-0, 305-390-406-0	72-54-08	001	Blend repair of vane airfoils on non aluminized stage 2 nozzle segments
			305-390-511-0, 305-390-401-0, 305-390-503-0, 305-390-407-0, 305-390-514-0, 305-390-403-0	72-54-08	002	Replacement of Slabbed Head Bolts
			305-390-504-0, 305-390-408-0, 305-390-517-0, 305-390-404-0, 305-390-306-0, 305-390-411-0	72-54-08	004	Blend repair of vane airfoils on aluminized stage 2 nozzle segments
			305-390-518-0, 305-390-601-0, 305-390-307-0, 305-390-506-0, 305-390-606-0	72-54-08	007	Touchup of Aluminization on Stage 2 Nozzle Segments
93	TRP/72-54/093	LPT NOZZLE SEGMENT, STG.3	301-557-612-0, 305-390-801-0, 301-557-620-0, 305-390-802-0, 305-390-701-0, 305-390-803-0	72-54-08	001	Blend repair of vane airfoils on non aluminized stage 3 nozzle segments
			305-390-702-0, 305-390-804-0, 305-390-704-0, 305-390-805-0, 305-390-705-0, 305-390-706-0	72-54-08	002	Replacement of Slabbed Head Bolts
94	TRP/72-54/094	LOW PRESSURE TURBINE NOZZLE SEGMENTS, STAGES 4	301-557-708-0, 305-391-003-0, 301-557-714-0, 305-390-901-0, 305-390-902-0, 305-390-904-0,	70-41-11	-	Remove high metal and burrs on lateral faces by blending
			305-391-001-0, 305-391-002-0	72-54-08	001	Blend repair of vane airfoils on non aluminized stage 4 nozzle segments
				72-54-08	002	Replacement of Slabbed Head Bolts
95	TRP/72-54/095	LPT INNER STATIONARY AIR SEAL, STG.2	301-317-410-0, 335-040-403-0, 335-040-405-0, 335-040-407-0	72-54-09	002	Reconditioning of Plasma Coating
96	TRP/72-54/096	LPT INNER STATIONARY AIR SEAL, STG.3	301-317-308-0, 335-040-501-0, 335-040-504-0, 335-040-505-0	72-54-09	002	Reconditioning of Plasma Coating
97	TRP/72-54/097	LPT INNER STATIONARY AIR SEAL, STG.4	301-317-210-0, 335-040-601-0, 335-040-604-0, 335-040-605-0, 335-040-606-0	72-54-09	002	Reconditioning of Plasma Coating
98	TRP/72-54/098	LOW PRESSURE TURBINE COOLING AIR TUBE ASSEMBLIES	305-429-803-0, 305-429-703-0, 305-429-804-0, 305-429-902-0, 305-429-903-0, 305-429-602-0, 305-429-603-0, 305-429-702-0	72-54-11	-	CLEAN & INSPECT ONLY
99	TRP/72-54/099	LPT COOLING AIR MANIFOLD	301-320-109-0, 301-320-110-0	72-54-13	001	Replacement of Swaged Self-Locking Inserts
				72-54-13	002	Spot Touchup of Surface Coatings
				72-54-13	002	Replacement of Surface Coatings
100	TRP/72-54/100	LPT SUPPORT COOLING AIR TUBE	301-386-005-0	70-45-11	-	Welding of cracks
101	TRP/72-54/101	THERMAL SCREEN	305-428-901-0	70-45-11	-	Welding of crack or broken
102	TRP/72-55/102	LPT SHAFT	301-330-046-0, 301-330-066-0, 301-330-047-0, 301-330-067-0, 301-330-060-0, 301-330-061-0	72-55-01	001	Repair of stretch, peel off and blistering of paint by spot touchup using Sermetel 196 coating
			305-419-205-0, 305-419-206-0, 301-330-065-0	72-55-01	014	Blending of the forward anti-rotation
				72-55-01	015	Repair of illegible part markings
103	TRP/72-55/103	LPT STUB SHAFT	301-330-618-0, 301-330-629-0, 301-330-619-0, 301-330-630-0, 301-330-623-0, 301-330-624-0	72-55-02	011	Reconditioning the locating diameter I by plasma spraying
			301-330-626-0, 301-330-627-0, 301-330-628-0	72-55-02	003	Reconditioning the locating diameter D by plasma spraying
				72-55-02	012	Repair of illegible part markings
104	TRP/72-55/104	FORWARD ROTATING AIR SEAL ASSY	301-519-418-0, 301-519-419-0 301-519-421-0	72-55-03	002	Repair of The Abradable Coating
105	TRP/72-55/105	REAR ROTATING AIR OIL SEAL	301-330-811-0, 301-330-814-0, 305-484-001-0, 301-330-908-0, 301-330-909-0	72-55-04	001	Repair of the locating diameter of the rear rotating air seal which aligns with the stub shaft forward (Diameter A)
				72-55-04	004	Repair of the locating diameter of the rear rotating air seal which aligns with LPT shaft diameter (Diameter X)
106	TRP/72-55/106	CENTER VENT TUBE	301-319-722-0, 301-319-724-0, 334-007-196-0	72-55-06	001	Repair of the Front and/or Mid Journals
				72-55-06	002	Repair of the Aft Journals
				72-55-06	006	Repair the locating holes of the center vent tube by drilling 3 new holes
				72-55-06	009	Last cleaning of the center vent tube holes
107	TRP/72-55/107	SELF LOCKING NUT	650-784-038-0	72-55-07	002	Replacement of Silver Coating
108	TRP/72-55/108	NUT – BEARING SELF LOCKING	650-784-016-0, 64ECR101	72-55-07	002	Replacement of Silver Coating
109	TRP/72-55/109	NUT – RETAINER NO 5 BEARING	301-547-905-0, 301-547-907-0	72-55-07	002	Replacement of Silver Coating
110	TRP/72-55/110	NUT – AIR/OIL SEPARATOR SELF LOCKING	650-784-037-0	72-55-07	002	Replacement of Silver Coating
111	TRP/72-55/111	CENTER VENT TUBE EXTENSION DUCT	305-408-301-0	72-55-10	001	Replacement of One or Several Locating Pins
				72-55-10	002	Reconditioning of Slot by Weld Buildup
				72-55-10	003	Repair of the Front Locating Diameter
112	TRP/72-55/112	FWD ROTATING OIL SEAL	305-098-405-0, 305-098-406-0, 305-098-407-0	72-55-12	001	Reconditioning of the abradable coating
113	TRP/72-55/113	BUMPER BEARING	305-097-903-0	72-55-13	001	Reconditioning of Locating Diameter
114	TRP/72-55/114	NO.4 BRG FWD ROTATING OIL SEAL	301-334-416-0, 301-334-417-0	72-55-14	001	Repair of the Abradable Coating
115	TRP/72-55/115	AIR OIL SEPARATOR	337-108-502-0, 305-025-408-0, 305-025-411-0, 335-044-506-0	70-41-11	-	Repair light surface damage (pitting, wear & nick) by blending
				72-55-15	001	Touchup of Surface Protection on Air/Oil Separator
				72-55-15	002	Touch up of surface protection on air/oil separator cover
				72-55-15	003	Reconditioning of Drive Slots on Air/Oil Separator
				72-55-15	004	Repair of the LPT Shaft Locating Diameter and Mating Face on the Air/Oil Separator
				72-55-15	005	Repair of the Locating Diameter with the Center Vent Tube Rear
				72-55-15	008	Clean and Packaging
116	TRP/72-55/116	LPT PLUG SHAFT ASSEMBLY	301-546-107-0	70-41-12	-	Blend repair of tang
				72-55-16	001	Reconditioning of Rabbet Diameter A
				72-55-16	001	Reconditioning of Rabbet Diameter B
				72-55-16	002	Reconditioning of Inner Diameter C
117	TRP/72-56/117	TURBINE FRAME	335-014-610-0, 335-014-633-0 335-014-611-0, 335-014-634-0, 335-014-612-0, 335-014-635-0, 335-014-617-0, 335-014-620-0, 335-014-631-0, 335-014-632-0	72-56-01	001	Replacement of the self-locking nuts and/or the gang channel self-locking nuts
				72-56-01	002	Replacement of studs
				72-56-01	002	Repair of crack in the stop weld
				72-56-01	007	Reconditioning of locating Diameter A of LPT frame with LPT case, by thermal spray coating
118	TRP/72-56/118	NO.5 BEARING SUPPORT	301-321-242-0, 301-321-253-0, 301-321-258-0, 301-321-259-0, 301-321-270-0, 301-321-271-0	72-56-02	002	Reconditioning the abradable coating
				72-56-02	006	Reconditioning of rabbet diameter G
119	TRP/72-56/119	NO.5 BEARING OIL SUMP ASSEMBLY	305-046-919-0, 305-046-920-0	72-56-03	003	Repair the inner rabbet diameter (diameter B) of sump with No. 5 bearing support
			305-046-922-0
120	TRP/72-56/120	MIDSTREAM FAIRING	301-321-612-0	72-56-04	001	Replacement of anchor nuts
				72-56-04	002	Reconditioning of cracks on midstream fairing by welding
121	TRP/72-56/121	OIL INLET COVER	336-024-705-0, 301-350-235-0, 336-024-706-0, 301-350-238-0, 336-024-707-0, 336-024-708-0, 301-350-239-0, 301-350-240-0, 301-350-234-0	72-56-06	002	Repair of the anchor nuts and the crimped self locking nuts.
				72-56-06	004	Repair of cracks on cover oil inlet by weld build up
122	TRP/72-56/122	REAR COVER	335-071-001-0, 335-071-002-0, 305-371-305-0, 305-371-307-0, 305-371-308-0	72-56-07	002	Filler welding of cracks on the rear cover
123	TRP/72-61/123	INLET GEARBOX HOUSING	9976M74G04	72-61-01	002	Repair of stripped jackscrew holes
				72-61-01	003	Dimensional restoration by metal spray of diameter C
				72-61-01	003	Dimensional restoration by metal spray of diameter B
				72-61-01	003	Dimensional restoration by metal spray of Surface A
				72-61-01	005	Inlet gearbox housing blend repair
124	TRP/72-61/124	RADIAL BEVEL GEAR	9972M31G03	72-61-03	001	Replacement of Oil Seal
125	TRP/72-61/125	NO.3 BEARING ROTATING SEAL	9989M47P01, 9989M47P02, 9989M47P03	70-41-11	-	Removal high metal on seal serration by blending
				70-41-11	-	Removal nicks, dents, and burrs on thread by blending
				70-41-11	-	Removal galling, scuffing, and metal pickup on surface A and/ or surface E, controlled by dimension F by hand lap.
				72-61-04	001	Removal and Application of Dry Film Lubricant
126	TRP/72-61/126	NO. 3 BEARING LOCKING NUT	9972M46G03, 9972M46G05	70-41-11	-	Remove high metal on the thread by hand polish
				72-61-05	003	Replacement of Fiber Washer
				72-61-05	005	Apply Dry Film Lubricant
				72-61-05	006	Repair dia B by grinding
				72-61-05	006	Repair dia B by thermal spray
127	TRP/72-61/127	NO. 3 BEARING PULLER RING	9972M49G02	72-61-07	001	Replacement of flat washer
128	TRP/72-62/128	TGB HOUSING	335-300-003-0, 335-300-401-0, 335-300-005-0, 335-300-402-0, 335-300-008-0, 335-300-403-0	70-41-11	-	Repair light defect on machined surface by hand blending
			335-300-009-0, 335-300-010-0, 335-300-011-0, 335-300-012-0	72-62-01	001	Replacement of Key-Locked in, Self-Locking Inserts
				72-62-01	002	Replacement of Key-Locked Studs
				72-62-01	003	Replacement of Identification Plate Serrated Nails
				72-62-01	004	Spot Touchup of Non-Machined Surface
				72-62-01	006	Repair the machined face E by plasma spraying
				72-62-01	006	Repair bearing support locating diameters E and/or H by plasma spraying
				72-62-01	007	Stop Drilling of the Inner Web Crack
				72-62-01	008	Installation of Bushings in the Stud Holes on the TGB Housing Web for the Future Use of a Bolt Washer-Nut Attachment System
129	TRP/72-62/129	TGB INPUT BEVEL GEARSHAFT	335-303-702-0, 335-321-001-0, 335-321-005-0, 335-321-006-0, 335-321-008-0	72-62-02	004	Replacement of Rivets
				72-62-02	005	Replacement of the Ring Seal
130	TRP/72-62/130	GB OUTPUT BEVEL GEARSHAFT	335-302-101-0, 335-322-402-0, 335-322-403-0, 335-322-405-0	72-62-02	005	Replacement of the Ring Seal
131	TRP/72-62/131	TGB HORIZONTAL DRIVE SHAFT	335-319-701-0, 335-319-703-0	72-62-06	001	Replacement of Oil Retaining Sleeve
132	N/A	N/A	N/A	N/A	N/A	N/A
133	TRP/72-62/133	TRANSFER GEARBOX RADIAL DRIVE SHAFT	335-319-601-0, 335-319-603-0, 335-305-303-0	72-62-06	001	Replacement of Oil Retaining Sleeve and Oil Distributor
134	TRP/72-62/134	TGB HORIZONTAL DRIVE SHAFT HOUSING	335-306-400-0	72-62-07	001	Weld Repair of Cracks
135	TRP/72-63/135	AGB 47 TOOTH GEARSHAFT	335-302-204-0, 335-302-205-0, 335-302-207-0, 335-302-201-0, 335-302-206-0	72-63-03	003	Replacement of the oil retaining ring on the 47-tooth gear-shaft assembly
136	TRP/71-21/136	FORWARD AND AFT ENGINE MOUNT	310A1020-1, 310A1020-19, 310A1020-3	71-21-13	-	CLEAN & INSPECT ONLY
137	TRP/71-21/137	WIRE BUNDLE ASSEMBLY	61-31508	71-51-11	-	CLEAN & INSPECT ONLY
138	TRP/72-09/138	BEARING NO. 1 – BALL	305-364-002-0, 305-364-102-0, 305-364-103-0, 337-108-201-0	72-09-01	-	CLEAN & INSPECT ONLY
139	TRP/72-09/139	BEARING NO. 2 – ROLLER	305-366-203-0, 305-366-204-0, 305-366-202-0, 337-108-301-0, 337-108-302-0, 305-365-704-0	72-09-01	-	CLEAN & INSPECT ONLY
140	TRP/72-09/140	BEARING NO. 3 – BALL THRUST	1461M14P04, 1461M16P02, 1461M16P04, 1461M16P06, 9340M90P02, 9340M90P06, 9732M10P12, 9732M10P17, 9732M10P18, 9995M18G02, 9995M18G05	72-09-01	-	CLEAN & INSPECT ONLY
141	TRP/72-09/141	BEARING NO. 4 – ROLLER	305-355-622-0, 305-355-625-0, 305-355-717-0, 335-352-301-0, 340-167-901-0, 335-352-302-0, 340-167-904-0, 340-167-905-0, 305-355-720-0, 335-352-304-0, 340-167-906-0, 335-352-305-0	72-09-01	-	CLEAN & INSPECT ONLY
142	TRP/72-09/142	BEARING NO. 5 – ROLLER	305-351-905-0, 305-352-004-0, 337-108-401-0	72-09-01	-	CLEAN & INSPECT ONLY
143	TRP/72-09/143	IGB RADIAL BEVEL GEAR BALL BEARING (BEARING-BALL THRUST)	9725M84P05, 9725M84P06, 9725M84P08, 9725M84P09, 9541M89P01	72-09-01	-	CLEAN & INSPECT ONLY
144	TRP/72-09/144	IGB RADIAL BEVEL GEAR ROLLER BEARING (BEARING-ROLLER CYLINDRICAL)	9972M33P02, 9972M33P03, 9972M33P06, 9972M33P07, 9972M33P08	72-09-01	-	CLEAN & INSPECT ONLY
145	TRP/72-09/145	IGB RADIAL BEVEL GEAR ROLLER THRUST BEARING (BEARING-ROLLER CYLINDRICAL)	9972M34P01, 9972M34P02, 9972M34P08, 9972M34P09, 9972M34P10	72-09-01	-	CLEAN & INSPECT ONLY
146	TRP/72-21/146	FAN AND BOOSTER BOLTS	J815P046A, J815P056A, J815P046A, J815P056A, J818P060A	72-21-11	-	CLEAN & INSPECT ONLY
147	TRP/72-21/147	SEALING FLANGE	335-003-905-0	72-21-12	-	CLEAN & INSPECT ONLY
148	TRP/72-21/148	FAN / BOOSTER CENTERING SHROUD	335-352-001-0	72-21-17	-	CLEAN & INSPECT ONLY
149	TRP/72-22/149	NO. 1 BEARING HOUSING	301-293-011-0	72-22-04	-	CLEAN & INSPECT ONLY
150	TRP/72-22/150	NO. 1 BEARING SLEEVE	301-297-810-0, 301-297-812-0	72-22-12	-	CLEAN & INSPECT ONLY
151	TRP/72-22/151	RETAINING NUT OIL SEPARATOR	301-436-804-0	72-22-13	003	Repair of the non silver plate mating faces of the retaining nuts
152	TRP/72-22/152	BAFFLE OIL NO 1 BEARING	301-475-207-0, 301-475-207-6	72-22-14	002	Restoration of the shimming function by installing a shim on the baffle
153	TRP/72-22/153	RING SENSOR N1 SPEED	301-298-110-0	72-22-15	-	CLEAN & INSPECT ONLY
154	TRP/72-23/154	FAN FRAME ASSEMBLY	335-034-928-0, 335-034-937-0, 335-034-931-0, 335-034-941-0, 335-034-934-0, 335-034-945-0, 335-034-936-0, 335-034-946-0, 335-034-932-0, 335-034-947-0, 335-034-933-0, 335-034-956-0, 335-034-935-0, 335-034-964-0	72-23-01	-	CLEAN & INSPECT
						REPAIR (COVERED ON FAN FRAME MODULE)
					003	Replacement of Swaged Self-Locking Inserts
155	TRP/72-23/155	FAN INLET CASE	335-019-297-6, 335-019-271-6, 335-111-303-6, 335-019-289-6, 335-019-282-6, 335-019-265-6, 335-019-285-6, 335-019-267-6, 335-019-286-6, 335-019-268-6, 335-019-298-6, 335-019-270-6, 335-111-301-6, 335-019-269-6, 335-111-302-6	72-23-02	-	CLEAN & INSPECT
						REPAIR (COVERED ON FAN FRAME MODULE )
					002	Partial Reconditioning of Abradable Epoxy Liner
					008	Replacement of abradable liner
156	TRP/72-23/156	FAN OUTLET GUIDE VANE INNER SHROUD ASSEMBLY	335-011-004-0, 335-011-006-0, 335-011-020-0, 335-011-005-0, 335-011-021-0	72-23-04	-	CLEAN & INSPECT
						REPAIR (COVERED ON FAN FRAME MODULE )
					004	Replacement of riveted self-locking nuts
157	TRP/72-23/157	HOUSING OUTER RADIAL DRIVE SHAFT	335-030-701-0	72-23-05	-	CLEAN & INSPECT ONLY
158	TRP/72-23/158	PIN-MOUNT AGB	301-566-807-0	72-23-10	-	CLEAN & INSPECT ONLY
159	TRP/72-23/159	PIN-STRAIGHT-HEADED	335-021-301-0	72-23-10	-	CLEAN & INSPECT ONLY
160	TRP/72-31/160	COMPRESSOR ROTOR BLADE STG 1 RETAINERS	9523M11G01, 9523M11G03	72-31-09	-	CLEAN & INSPECT ONLY
161	TRP/72-31/161	COMPRESSOR ROTOR BLADE STG 2 RETAINERS	9523M12G01	72-31-09	-	CLEAN & INSPECT ONLY
162	TRP/72-31/162	COMPRESSOR ROTOR BLADE STG 3 RETAINERS	9523M12G01	72-31-09	-	CLEAN & INSPECT ONLY
163	TRP/72-31/163	COMPRESSOR ROTOR BLADE STG 4 LOCK	9984M27P01, 9984M27P02, 9984M27P07	72-31-10	-	CLEAN & INSPECT ONLY
164	TRP/72-31/164	COMPRESSOR ROTOR BLADE STG 5 LOCK	9984M27P03, 9984M27P03, 9984M27P08	72-31-10	-	CLEAN & INSPECT ONLY
165	TRP/72-31/165	COMPRESSOR ROTOR BLADE STG 6 LOCK	9984M28P01, 9984M28P02	72-31-10	-	CLEAN & INSPECT ONLY
166	TRP/72-31/166	COMPRESSOR ROTOR BLADE STG 7 LOCK	9984M28P01, 9984M28P02	72-31-10	-	CLEAN & INSPECT ONLY
167	TRP/72-31/167	COMPRESSOR ROTOR BLADE STG 8 LOCK	9984M29P01, 9984M29P02, 9984M29P03	72-31-10	-	CLEAN & INSPECT ONLY
168	TRP/72-31/168	COMPRESSOR ROTOR BLADE STG 9 LOCK	9984M29P01, 9984M29P02, 9984M29P03	72-31-10	-	CLEAN & INSPECT ONLY
169	TRP/72-31/169	COMPRESSOR SHAFT RETAINING RING	9972M54P01, 1663M70P01, 1663M70P02	72-31-14	-	CLEAN & INSPECT ONLY
170	TRP/72-31/170	SELF-WRENCHING BOLTS	9526M28G01, 1523M39P03, 1523M39P09	72-31-20	-	CLEAN & INSPECT ONLY
171	TRP/72-32/171	COMPRESSOR STOTOR SEAL ASSEMBLY STAGE 1	9978M69G40, 9978M69G41, 9978M69G43, 9978M69G44, 9978M69G50, 9978M69G51, 9978M69G52, 9978M69G53	72-32-05	-	CLEAN & INSPECT ONLY
172	TRP/72-32/172	COMPRESSOR STOTOR SEAL ASSEMBLY STAGE 2	1277M90G01, 1277M90G02, 9978M69G41, 9978M69G44, 9978M69G51, 9978M69G53	72-32-05	-	CLEAN & INSPECT ONLY
173	TRP/72-32/173	COMPRESSOR STOTOR SEAL ASSEMBLY STAGE 3	1277M90G01, 1277M90G02	72-32-05	-	CLEAN & INSPECT ONLY
174	TRP/72-32/174	COMPRESSOR STOTOR SEAL ASSEMBLY STAGE 4	9513M94G01, 9513M94G04, 9955M43G01, 1559M27G01	72-32-05	-	CLEAN & INSPECT ONLY
175	TRP/72-32/175	COMPRESSOR STOTOR SEAL ASSEMBLY STAGE 5	9513M94G04, 9513M94G02, 9513M94G05, 9955M43G02, 1559M27G06	72-32-05	-	CLEAN & INSPECT ONLY
	176 – 200 will be used for next addition of Capability List
201	TRP/72-54/201	LOW PRESSURE TURBINE DISK - STAGE 1	301-331-121-0, 301-331-124-0, 301-331-125-0, 301-331-127-0, 301-331-126-0	72-54-03	-	CLEAN & INSPECT ONLY
202	TRP/72-54/202	LOW PRESSURE TURBINE DISK - STAGE 2	301-331-221-0, 301-331-224-0, 301-331-225-0, 301-331-226-0, 301-331-227-0	72-54-03	-	CLEAN & INSPECT ONLY
203	TRP/72-54/203	LOW PRESSURE TURBINE DISK - STAGE 3	301-331-318-0, 301-331-321-0, 301-331-322-0	72-54-03	-	CLEAN & INSPECT ONLY
204	TRP/72-54/204	LOW PRESSURE TURBINE DISK - STAGE 4	301-331-419-0, 301-331-425-0, 301-331-427-0, 301-331-429-0	72-54-03	-	CLEAN & INSPECT ONLY
205	TRP/71-21/205	FORWARD ENGINE MOUNT	310A1020–1, –19 AND 310A10XX	71-21-13	-	CLEAN & INSPECT ONLY
206	TRP/71-21/206	AFT ENGINE MOUNT	310A1020 –3 AND 310A10XX	71-21-13	-	CLEAN & INSPECT ONLY
207	TRP/78-11/207	TURBINE EXHAUST PLUG ASSEMBLY	301A1050–3, 314A1501–11, –13, –14, –16, –17, –18, –9	78-11-13	1-1	Repair of cracked Plug Assembly, Repair 1-1 Paragraph 1.
					-	Replace damage and/or loose rivet
208	TRP/78-11/208	TURBINE EXHAUST SLEEVE ASSEMBLY	301A1030–5, 314A1502–1, –37, –50, –51, –57, –58, –59, –71	78-11-23	1-1	Nutplate Replacement, Repair 1-1 Paragraph 2
					1-1	Repair of cracked Sleeve Assembly, Repair 1-1 Paragraph 3A
					2-1	Seal Spring Replacement, Repair 2-1 Paragraph 3